Program Requirements and ExpectaƟons

And Master Plan of InstrucƟon

Master AutomoƟve Service Technology 1 & 2

Stanley Elkins &

Michael McPherson, Instructors

2026-2027

The mission of Lake Technical College is to be an integral component of the economic growth

and development in our communies by oﬀering a variety of high quality career-educaon and

training opportunies.

Lake Technical College does not discriminate on the basis of race, religion, color, naonal

origin, gender, genec informaon, age, pregnancy, disability, or marital status in its educa-

onal programs, services or acvies, or in its hiring or employment pracces. The district also

provides access to its facilies to the Boy Scouts and other patrioc youth groups, as required

by the Boy Scouts of America Equal Access Act, or any other youth group listed in Title 36 of the

United States Code as a patrioc society.

LAKE TECHNICAL COLLEGE

Program Requirements and Expectations

ADMISSION REQUIREMENTS

Applicants must be at least 16 years of age and should be academically, physically, and emotionally capable of meeting

the demands of the chosen program. Applicants make initial application through the Admissions Office. A minimum skills

evaluation is part of the admission process.

The Career and Technical Education programs have the following minimum admissions requirements:

1. Complete an LTC online application.

2. Take the basic skills examination, if required.

3. Meet with a career advisor.

4. Fulfil additional entry requirements as needed for individual programs.

A high school diploma or GED is not required to enroll in most programs. However, it is recommended that all students

complete either a high school diploma or a GED prior to program completion.

TESTING REQUIREMENTS

All applicants for Career and Technical Education (CTE) programs 450 hours or more, with the exception of Florida Law

Enforcement Academy and Paramedic applicants, take a state mandated basic skills evaluation prior to enrollment.

Basic skills evaluation scores must be valid at the time of enrollment. Testers must be 16 years of age or older.

If a student has met or exceeded standard scores on one area of one test, they may use another test to meet the

additional skill area requirements. It is acceptable to combine test scores from more than one test. (Rule 6A-10.315,

F.A.C.)

Assessment instruments meeting this requirement include:

Per 2020, FS 1008.30 – Common placement testing for public postsecondary education and Rule 6a-10.040

(eff.

2/16/21)

No expiration date:

• Tests of Adult Basic Education (TABE), Forms 11 and 12, 2017;

• Comprehensive Adult Student Assessment System (CASAS), GOALS 900 Series, 2019;

• 2014 GED

Tests: Reasoning through Language Arts and Mathematical Reasoning where a minimum

score as required in Rule 6A-6.0201, F.A.C

(eff. 3/23/16), has been attained on each test.

Good for 2 years from the date of testing:

• A common placement test where a minimum score has been achieved pursuant to

Rule 6A-10.0315,

F.A.C.(eff. 9/24/19);

• PERT, SAT, The College Board, ACT, Next Generation, ACCPLACER, The College Board

Per 2020, FS 1004.91, FS 1008.30, and the 2021 CTE Basic Skills Assessment Technical Assistance Paper

–

Requirements for career education program basic skills – Programs 450 hours or more

• An adult student with a disability may be exempted. (per Rule 6a-10.040(eff. 2/16/21), FS 1004.02(6)

(eff.

2020) – must follow LTC policy and process);

• A student who possesses a college degree at the associate in applied science level or higher;

• Any student who entered 9th grade in a Florida public school in the 2003-2004 school year, or any year

thereafter, and earned a Florida standard high school diploma. (Graduated 2007+)

• A student who is serving as an active duty member of any branch of the United States Armed Services;

• A student who passes a state or national industry certification or licensure examination that is identified in

State Board of Education rules and aligned to the career education program in which the student is

enrolled;

• An adult student who is enrolled in an apprenticeship program that is registered with the Department of

Education in accordance with chapter 446;

Master Automotive Service Technology 1 & 2

Page 1 of 20

Master Plan of Instruction 07/22/26

• A student who demonstrates readiness for public postsecondary education pursuant to s. 1008.30 (see

testing chart below) and applicable rules adopted by the State Board of Education. If a student has met or

exceeded standard scores in one area of one test, another test may be used to meet the additional skill

area requirements. It is acceptable to combine test scores from more than one test;

• A student who was previously tested and referred to developmental education at a Florida College

System (FCS) institution college may be reported as meeting basic skills requirements once they

successfully complete the required developmental education and will not need to be retested.

• Students enrolled in school district or FCS institution law enforcement training academies are not subject

to basic skills exit requirements in s. 1004.91 F.S. or Rule 6A-10.040 F.A.C. The Florida Department of

Law Enforcement (FDLE) has designated the Florida Basic Abilities Test (FBAT) for use with these

students; please refer to s. 943.17(6), F.S.,

for more information.

Applicants transferring appropriately leveled TABE, CASAS GOALS, GED® test sections, or other common placement

tests must do so by having an official score report sent directly to the Admissions Office prior to enrollment in the program.

Scores brought by hand will be accepted only if the document provided by the outside testing center is in a sealed

envelope.

Remediation of Basic Skills

Students who do not meet the basic skills exit scores set by the Florida Department of Education for their program are

strongly encouraged to begin attending remediation classes prior to or at the time of enrollment in a Career and Technical

Education program and make acceptable progress as determined by the ASB faculty member. Lake Technical College

follows vendor guidelines for all retesting. Students with an approved early testing waiver may be permitted to test early. It

is highly recommended students meet state mandated basic skills requirements by the time they have completed 50% of

their program. Students who do not meet state mandated basic skills exit scores may not receive a certificate of

completion as per Florida Department of Education rules.

Some basic skills test scores are good for two years and must be valid at the time of enrollment. Basic skills test scores

that expire during continuous enrollment remain valid until the end of such enrollment. Under continuous enrollment,

students must be enrolled at least 50% of each semester. Continuous enrollment applies to attendance in a single

program.

DISABILITY ACCOMMODATIONS

Federal and state legislation requires the provision of accommodations for students with disabilities as identified on the

secondary student’s IEP or 504 plan or postsecondary student’s accommodations plan to meet individual needs to ensure

equal access. Postsecondary students with disabilities must self-identify, present documentation, request

accommodations if needed, and develop a plan with their postsecondary provider.

Students desiring accommodations or updates to their accommodations are encouraged to self-identify before or as soon

as possible to the special populations staff and provide documentation that clearly shows evidence of a disability and

applicable accommodations. The special populations staff will schedule a meeting with the student and faculty to discuss

the documented disability and applicable accommodations.

Accommodations received in postsecondary education may differ from those received in secondary education and are

reasonable as they relate to the industry or field. Accommodations change the way the student is instructed. Students with

disabilities may need accommodations in such areas as instructional methods and materials, assignments, assessments,

time demands, schedules, learning environment, assistive technology and special communication systems. Note:

attendance does not qualify as an accommodation. Documentation of the accommodation requested and provided is

maintained in a confidential file.

Students in need of academic accommodations for a disability may consult with the special populations staff to arrange

appropriate accommodations. Students are required to give reasonable notice (typically 5 working days) prior to

requesting an accommodation.

TUITION

Tuition is charged to adult students at a rate established by the State legislature. Current fee information is available in the

Admissions Office. Tuition is waived for eligible high school, career dual enrolled students. Tuition is due prior to the first

day of each payment period based on the Lake Technical College payment calendar. Failure to pay fees at the time class

begins may result in not being able to attend class and/or clinical.

Master Automotive Service Technology 1 & 2

Page 2 of 20

Master Plan of Instruction 07/22/26

INSURANCE

Personal injury/school accident insurance is required for all Career and Technical Education students. This insurance is

provided through Lake Technical College at the rate of $1.50 a month. The accident insurance fee will be charged to

students per payment period.

Health programs with clinical experiences require liability insurance in conjunction with requirements by the healthcare

facilities. The liability insurance fee is charged to students at the time of enrollment.

ATTENDANCE POLICY

Guidelines for All Students

In an effort to develop professional skills, regular attendance is required of all students. Students are expected to be in

their class promptly in the morning, after break, and after lunch. If it is necessary to be absent due to illness or

emergencies, all students are to notify the faculty member as soon as possible prior to the start of class, as is expected in

the workplace. Some programs have more rigid requirements for attendance. LTC recognizes that students may face

extenuating circumstances that could negatively impact their attendance. In such cases, LTC employs a Student

Retention Specialist who works with students and faculty to track attendance, to collaborate in developing strategies to

improve attendance, and to develop a plan.

CDE students are responsible for maintaining attendance in good standing at LTC. Should a student need to miss class

due to mandatory high school activities or tests, the student should give notice to their instructor and meet with the

Student Retention Specialist to document the absence. Approved absences may be set to not count against the student’s

overall attendance average.

Enrollment Period – period of time a student begins his/her education and training in a CTE program (i.e., August 15

January 3

) through the date of withdrawal or completion.

Payment Period – a set block of time in which a student pays for program hours (i.e., 300 hours, 450 hours)

Students who are approved to make up missed time must complete the required hours through attendance during

designated times outside the regular program schedule. Failure to complete scheduled make-up time may result in

withdrawal from the program and/or loss of financial aid. Make-up hours may not exceed 5% of the scheduled hours in

the payment period. There is a $25.00 make-up time fee per payment period.

Regularly scheduled class hours will be reported for attendance. Practice exercises completed at home will not count

toward hours in a program. Students will be enrolled in additional hours if needed. Current tuition and fees will apply.

Excessive absences - A student who is absent for six (6) consecutive class sessions will be withdrawn from his/her

program. A student must petition and be approved in order to return. Students exhibiting a pattern of consecutive

absences of less than six days will be subject to dismissal as determined by a School Intervention Team. A School

Intervention Team will review all petitions for re-enrollment. No additional fees will be charged if the student returns

during that current payment period, provided fees have not been refunded; however, time missed may be added at the

end of the program and will incur additional fees.

The excessive absences policy also applies to the adult education student. If the student requests to be re-enrolled

during the same enrollment period, he or she will be assessed a $10.00 re-enrollment fee. This may be waived

depending upon mitigating circumstances.

Students with excessive absences will face the possibility of the loss of financial aid, lower professional skills grades and

the ability to continue in the program.

*Note: licensure program attendance policies may be more rigid due to licensure requirements and supersede this

policy.

Leaving Campus During School Hours

For safety reasons, students will notify their faculty when leaving campus early. Students may leave campus for lunch

provided this is done within the allotted time.

Master Automotive Service Technology 1 & 2

Page 3 of 20

Master Plan of Instruction 07/22/26

CHECK IN/OUT FACTS AND RULES

1. Students are required to check in and check out using a designated school computer.

2. Students are to check out /in when going to lunch or leaving campus, but not for scheduled breaks or

restroom breaks. However, students who leave for extended periods of time without permission will be

checked out by their instructor.

3. Checking in early does not add time to hours present.

4. Checking out after the scheduled time of class does not add time to hours present.

5. Students must check out/in for their lunch breaks. Taking less than a 30-minute lunch break does not add

time to student hours present. Lunch break starts at the time a student logs out for lunch. Students are

expected to return and log back in within 30 minutes of the logout time. Students will be marked absent

for each minute past the 30 minutes allowed.

6. If a student accidentally checks out, he/she should check back in immediately. If done within a minute,

there is no reduction in student hours present.

7. It is NOT acceptable to check in or out for other students. Check in/out student IDs are to be kept

confidential as stated in the Acceptable Use Policies. Violation will result in dismissal from the program.

8. A student must notify his/her instructor if it is suspected that someone is tampering with another student’s

check in/out ID.

9. Instructors are permitted to perform attendance overrides to correct attendance errors; however, these

corrections must be made within two weeks of the original attendance date. Any changes needed beyond

this two-week window must be submitted to the appropriate administrator for review and approval. Each

instructor is allowed to complete one attendance override per student per academic year in cases of

student oversight (e.g., forgetting to log out at the end of the day). Any additional overrides for the same

student must be approved by an administrator.

10. There is NO limit to the number of instructor overrides if NOT due to the student’s negligence. Instructors

must record a reason for the override.

11. If a student’s check in/out ID does not work, he/she should see the instructor.

PLAN OF INSTRUCTIONAL PRACTICES

Teaching Methods

Lecture, demonstration, discussion, group interaction, verbal and written quizzes, skill practice, individualized instruction,

computerized tutorials, interactive learning, web-based learning, textbooks, workbooks, projects, journals, reports,

simulations, hands-on computer experience, collaborative learning, video-taped instructions, guest speakers, field trips,

customer service projects, program job shadowing, cooperative on-the-job training, interactive learning, and web-based

learning are among the teaching methods utilized.

Among the provisions made to allow for individual differences are pre-testing to determine entry level, workbooks and

study guides for progress at individual rate, progress grading, individualized instruction, individual project assignments,

and referral for basic skills remediation.

Online Access

Technology is an integral part of our daily lives. From smart phones to electronic tablets, these devices are becoming

items that many cannot function without. In addition, the Internet is changing the way education is delivered. Lake

Technical College strives to ensure that our students are able to compete in this technology driven world. With this in

mind, it is recommended that students have an online presence and access to the internet.

It is also important that students have an email address that they check for on a regular basis. A lot of information may

come to you through your email, so it is important that you check it regularly. If you do not have an email address, there

are numerous services that provide FREE email addresses. Please make sure your faculty have a current, working email

address for you. See your faculty for more information.

Social Media

The advent of social media has created a world-wide communication medium for people of all ages. While extremely

popular, these websites have also created their own set of “not-so-popular” problems such as cyber-stalking, identity theft,

cyber-bullying, cyber-cheating (posting of exam, or other course material), and a host of other nebulous challenges that

users may face. Another reality associated with social media is its far-reaching consequences for those who share posts

that may be seen by others as inappropriate.

Potential employers, current employers, civic, or educational organizations you may be associated with, and many others

are looking at social media sites for information that may tell them things about an individual. Students should also be

Master Automotive Service Technology 1 & 2

Page 4 of 20

Master Plan of Instruction 07/22/26

cautioned on how private their social media content really is – despite the settings on an account. All social media sites

are potentially vulnerable. A simple search of how to view pages that are set as “private” for a popular social media

website yielded numerous responses for ways to view the content. Everything from blogs to online videos offer to explain

how to accomplish this task.

Students in all programs need to be cognizant of the fact that most professions rely on great moral character. It is

recommended that when using social media, assume that all posts will be seen/read by everyone with access to the internet.

Evaluation

Class performance, quizzes, tests, attendance, portfolio assessments, completion of project assignments, decision-

making, professional skills, achievement of entry-level competencies, and other methods are used for evaluation. See

“Grading Procedures”.

Work Based Activities

Work-based learning activities play an integral part of the curriculum of LTC’s career-technical training programs. These

activities are planned with two objectives in mind. First, the activity provides students with the opportunity to develop and

apply a “real world” experience using the knowledge and skills attained in the program. Second, the activity provides the

faculty with objective input from potential employers or customers of program graduates. Each work-based activity has a

written instructional plan outlining objectives, experiences, competencies and evaluation required during the activity.

Work-based activities are program specific and may include:

• Unpaid in-school shop/lab activities to provide customer service opportunities under the direct supervision

of the program faculty.

• Unpaid job shadowing experiences that may include in-school or off-campus employer-based

experiences under the supervision of a qualified employer representative who is working closely with the

program faculty.

• Paid or unpaid cooperative training experiences conducted at the employer’s work location under the

supervision of a qualified employer representative and under the direction of the program faculty.

Cooperative Education

Cooperative training is available for students and coordinated by the faculty. Cooperative training is for students who

have shown competence in program training that indicates readiness for placement in an on-the-job program. High

school students participating in the cooperative job placement program must be in at least grade 12. Students must be

enrolled in their last course of their program in order to participate in Co-op. In addition, basic skills exit levels must be met

and the student can have no outstanding debt with the school. Students must be approved for Co-op prior to beginning,

including clearance through financial aid.

Students may be returned to the program for additional training if they do not function satisfactorily on the job or when the

cooperative agreement is terminated at the request of the student, parent, employer, or program faculty.

Veterans will be accepted into the program in accordance with the Department of Veterans Affairs approved program.

Additional information regarding co-op opportunities may be obtained from the program faculty.

Job Shadowing

Job shadowing experiences, or volunteer experiences, are available to students as part of their program training. These

experiences are designed to give the student actual hands-on experience doing a variety of related tasks. Length and

type of experiences will vary. The program faculty determines appropriateness of the experience. Additional information

regarding job-shadowing experiences may be obtained from the program faculty.

Career Dual Enrollment Students

All students enrolled in Lake Technical College are expected to function as adults. High school students will be held to

the same behavioral and performance standards as adult students.

Master Automotive Service Technology 1 & 2

Page 5 of 20

Master Plan of Instruction 07/22/26

GRADING PROCEDURE

The grading scale for LTC is as follows:

90 – 100 A (4 quality points)

80 – 89 B (3 quality points)

70 – 79 C (2 quality points)

60 – 69 D (1 quality point)

< 59 F (0 quality points)

I Incomplete

NG Not Graded

Note: passing thresholds may vary by program based on industry standards. Separate program requirements are listed

in the Master Plan of Instruction.

Lake Technical College is a postsecondary institution designed to provide trained individuals to industry. The grading

scale for this program reflects industry standards. The approved postsecondary program grading requirements must be

met if the student is to receive a certificate. In determining grades, most programs evaluate students equally in the areas

of skills (33.34%), knowledge (33.33%), and professional skills (33.33%). This structure should be included in the Master

Plan of Instruction. A few programs do not use this structure due to State licensure, board and/or curricular requirements.

Program Progress

Students are expected to complete the program of training within the hours allotted by the State of Florida for completion.

The student’s rate of progress will be closely monitored by the faculty and the Student Retention Specialist to ensure

program completion in a timely manner. Most tests, projects, and similar assignments must be completed in class under

the direction of the instructor.

Requirements for a Certificate

All competencies specified in the State of Florida Curriculum Framework for the program must be successfully completed

with at least a passing grade in the areas of skills, knowledge, and professional skills. Students must also meet minimum

basic skills requirements prior to graduation.

Professional Skills

Effective professional skills are the cornerstone to successful employment. Students are expected to demonstrate

productive professional skills during all phases of enrollment. Faculty will work with students who need assistance in this

area to improve the overall possibility for successful employment.

Attendance: Attends class for all scheduled hours assigned, arrives/leaves on time, contribute to class

discussion and is actively involved in all activities.

Character: Displays academic integrity (inclusive of not committing plagiarism), trustworthiness, dependability,

reliability, self-discipline, and self-responsibility.

Teamwork: Respects the rights of others; is a team worker; is cooperative; ensures confidentiality in all

classroom, clinical and other matters; demonstrates professional behavior in interactions with peers, preceptors,

and faculty.

Appearance: Displays appropriate dress, grooming, hygiene, and wears full regulation uniform of the day.

Attitude: Displays a willingness to cooperate and accept constructive criticism; sets realistic expectations;

approaches assignments with interest and initiative.

Productivity: Follows safety practices; conserves materials and supplies; maintains equipment; stays on task

and utilizes time constructively; demonstrates proactive learning through involvement in activities and

contributions to class discussions.

Organization: Manifests skill in prioritizing and management of time and stress; demonstrates flexibility in

handling change; completes assignments on time; uses work time appropriately.

Communication: Contacts faculty to report concerns; notifies faculty of tardy/absence one hour before start of

class; seeks clarification and understanding through appropriate, pertinent questions.

Master Automotive Service Technology 1 & 2

Page 6 of 20

Master Plan of Instruction 07/22/26

Leadership: Displays leadership skills; appropriately handles conflict and concerns; demonstrates problem-

solving capability; maintains appropriate relationships with supervisors/faculty and peers; follows the chain of

command.

Respect: Deals appropriately with cultural/racial diversity; does not engage in harassment of any kind to include

but not limited to verbal, nonverbal, and written; addresses faculty and peers in appropriate tone and with

appropriate language to include but not limited to electronic (email, text, etc.) communications.

STUDENT DRESS CODE

Students who attend Lake Tech shall dress in a manner appropriate for the job in which they are receiving training,

including any special protective gear and professional uniforms. All clothing, makeup, and jewelry must be clean, neat,

modest, in good repair, appropriately sized, and be neither distracting nor offensive. Students are expected to display

their valid student ID, or have on their person when unable to display due to safety in the program, at all times. Shorts are

not permitted in CTE program areas.

The Executive Director or designee has the final authority for determining whether or not a student’s apparel conforms to

the dress code. If it is determined that it does not, students will be required to change into clothing which will conform to

this code or leave campus. Students may return to campus when they have changed into appropriate clothing.

Students will wear the designated program uniform each day to class and while on a Job Shadow experience, Co-op or

clinical assignment. Shirts may be worn with pants or skirts. Shorts are not permitted. On designated days, some

programs will require students to dress in business attire suitable for a job interview. This is defined to be clothing that

would be acceptable for most job candidates to wear to a standard job interview.

NOTE - Remember that you are preparing for employment in a position in which public relations may be a factor in your

success. Individual desires cannot always take precedence.

GENERAL SCHOOL INFORMATION

Campus Safety

Lake Technical College makes every effort to provide a safe environment for all students, visitors, faculty and staff. Basic

safety standards, which will include fire drills, weather drills, equipment usage, and traffic regulations, will be covered in

the program orientation. These basic safety standards will be reinforced throughout the program enrollment. See the

current school catalog for additional campus safety information.

Follow Up

Lake Technical College is proud of its graduates and celebrates the next step graduates take whether it is employment,

military or further education. Prior to completing, students may visit the Career Success Center for assistance with

employability skills such as resume writing. In addition, faculty may provide students with employment leads. However, it

is up to the individual student to actively pursue employment opportunities. We like to hear how our graduates are doing

and want to celebrate your successes so be sure to communicate with your faculty any employment, military, or further

education you enter. Students are required to participate in an Exit Interview prior to their last day in their program.

Food and Drink

To protect equipment and furnishings in the classroom and laboratory areas, only water, in closed, covered containers, is

permitted. No other food or drinks are allowed, unless specific permission is granted by the faculty. However, under no

circumstance may food or drinks be in the computer lab areas.

Lunch

Food services are provided on the main campus in the Lake Tech Café and are available during breaks and lunch. Adult

students may leave the LTC campus during the scheduled 30-minute lunch break as long as they return to the program

on time.

Parking Regulations

Students may park only in the south parking lot in spaces not designated as staff or customer service parking. For safety,

loitering in or around vehicles once the vehicle is parked is not allowed, and a 5 mph speed limit is enforced. In

consideration of the neighbors and classes in session, loud music in vehicles on campus is prohibited.

Smoking

Master Automotive Service Technology 1 & 2

Page 7 of 20

Master Plan of Instruction 07/22/26

Lake Tech is a tobacco free institution. The use of tobacco products of any kind, including e-cigarettes, is not permitted at

any Lake Tech location. This includes the parking lots.

FINANCIAL AID

Policies and guidelines for the administration of all financial aid are established according to federal and state law.

Applicants complete an information form, Free Application for Federal Student Aid, and furnish documentation needed to

verify eligibility. More information on the application process may be obtained in the Financial Aid Office.

The Financial Aid Office will assist students, where possible, with access to financial support offered by federal agencies

(U.S. Department of Education – Pell Grants, Department of Veterans’ Affairs), other state and local agencies and local

organizations (scholarships).

TEXTBOOKS

For the most recent book list for any program visit Lake Technical College’s bookstore located in the Business Office.

Master Automotive Service Technology 1 & 2

Page 8 of 20

Master Plan of Instruction 07/22/26

LAKE TECHNICAL COLLEGE

Master Automotive Service Technology 1 & 2

INTRODUCTION

The Master Automotive Service Technology 1 & 2 programs are 1050 and 750 hour programs, respectively, responsible

for training individuals to attain an entry-level status in the automotive industry. The programs cover a broad range of

instruction that may be found in the program outline of this master plan. An appropriate amount of time is allotted to each

area to thoroughly cover needed instructional material as well as to gain manipulative skills.

The program utilizes both theory and practical application of material to help the students gain needed knowledge and

skills. Due to the increasing complexity of systems on today's automobile, it is even more important to know why a

procedure is done as well as how it is done. Understanding how a system functions, therefore, has an important role to

play in this program of study.

Each student must successfully complete written test material on theory and related topics as well as successfully

demonstrate the practical application of this information in the laboratory environment.

Prerequisites for this program should include a solid background in math and science in general with emphasis on basic

math, formulas, percentiles, fraction and decimal conversion, and the use of precision measuring equipment, physics,

chemistry and metallurgy. These areas are taught as part of the program of study, but it would be helpful to have these

skills in advance.

Materials used are self-paced which allow students to progress at their own pace under the supervision of the faculty.

Competencies in each area are completed after both written and performance testing.

This program requires basic skills exit scores of Reading/Language 9 and Math 10.

MASTER AUTOMOTIVE SERVICE TECHNOLOGY MISSION

The mission of the Master Automotive Service Technology Program is to prepare students for Entry Level employment in

the automotive mechanic field. It is also designed to assist those students who wish to update present skills and cross-

train in other automotive areas. The program focuses on student and industry needs. Training is constantly updated by the

faculty and program advisory committee to keep current with technological changes.

ESSENTIAL TRAINING TASKS

Top Physical Requirements:

● Lift and carry parts and equipment up to 50

pounds, and assist with team lifts for items up to

100 pounds.

● Crawl under vehicles or into confined engine

areas.

● Maintain balance on ramps and uneven

surfaces.

● Possess a valid driver’s license.

● Work in noisy, hot, or cold environments for up

to 8 hours/day.

● Safely operate shop tools, diagnostic equipment,

and machinery according to instructor guidance

and established safety standards.

● Handle small components and tools with

dexterity.

● Tolerate exposure to chemicals and fuel.

● Perform repetitive motions.

● Reach overhead and twist freely at the torso.

● Stand, stoop, crouch, bend, and kneel

frequently.

Top Mental/Cognitive & Emotional/Professional Requirements:

● Ability to communicate in verbal, written, and

electronic form.

● Read technical manuals and schematics.

● Follow multi-step repair procedures.

● Collaborate safely with service teams.

● Ability to retain, recall, and follow all industry and

program safety protocols and monitor repair

quality.

● Take responsibility for repairs.

● Breaks are limited to scheduled times, and

personal phone use is restricted except during

designated break periods or when required for

training purposes.

● Ability to manage tasks and complete assigned

activities within expected time constraints.

● Troubleshoot mechanical and electrical issues.

● Apply critical thinking to new vehicle

technologies.

Master Automotive Service Technology 1 & 2

Page 9 of 20

Master Plan of Instruction 07/22/26

● Demonstrate patience and problem-solving.

● Exhibit pride in workmanship and safety

compliance.

● Maintain composure under pressure.

● Maintain continuous engagement in assigned

training activities for up to 8 hours per day in an

industrial learning environment.

CLASS SCHEDULE

Full-time students attend class from 8:00 AM to 4:00 PM Monday through Thursday with a 30-minute lunch period. This

schedule provides 7.5 hours of instruction each day for a total of 30 hours per four-day week, excluding holidays and

school breaks as outlined in the current school calendar.

CLASSROOM/LAB PROCEDURES

Students proceed at their own pace with written, audio-visual, and hands-on training. They are tested periodically with

written and practical testing. Practical shop experiences are designed to enhance and reinforce the theories involved as

well as to develop manipulative skill and good work and safety practices.

Teaching aids utilizing digital presentations, etc., are used to a great extent throughout all instruction. Wall charts,

specification charts, and other reference materials are on constant display throughout the classroom and laboratory.

A great deal of equipment must be utilized for "hands-on" skill requirements. Test equipment such as, brake equipment,

compression gauges, and electronic test equipment, are used so that the students will acquire rapport in working with

such equipment and will have a basis for future troubleshooting requirements. Materials are reviewed and updated

periodically to keep them as current and as relevant as possible.

Students are responsible for all laboratory requirements such as maintaining tools, equipment, and facilities, writing repair

orders, tool room management, and cleanup of shop areas.

Grade Requirement

Using the grading scale set by Lake Technical College, students must pass each program category with a score

of 80% or higher. If a student does not meet the 80% minimum in any category, the final course grade recorded in

the Student Information System will reflect the category in which the student was not successful.

KNOWLEDGE (33.33% of the grade)

The Knowledge grade is composed of quizzes, written exams, and assignments.

PROFESSIONALSKILLS (Work Habits) (33.33% of the grade)

The Professional Skills grade is based on the attributes listed.

SKILLS (33.34% of the grade)

The Skills grade results from performance during lab work.

Skills - Student Performance Objectives

One-third of the grade is based on hands-on skills, as determined by the student performance objectives. Student

performance objectives are based on criteria that have been identified for each of the competencies listed in the Florida

Curriculum Frameworks and Student Performance Standards (attached). Students are given an overall rating for the

competency. The ratings are as follows:

5 The student can perform this skill without supervision and with initiative and adaptability to problem situations.

4 The student can perform this skill satisfactorily without assistance or supervision.

3 The student can perform this skill satisfactorily but requires some assistance and/or supervision.

2 The student can perform parts of this skill satisfactorily, but requires considerable assistance and/or supervision.

1 The student cannot perform this skill even with constant supervision.

Students who score below a three (3) on the Performance Test will have the opportunity to repeat the learning activities,

practice the preparation again and retake the Performance Test.

Professional Skills

One-third of the grade is based on the Professional Skills. Effective Professional Skills are the cornerstone to successful

employment. Students are expected to demonstrate productive Professional Skills during all phases of enrollment.

Master Automotive Service Technology 1 & 2

Page 10 of 20

Master Plan of Instruction 07/22/26

Faculty will work with students who need assistance in this area to improve the overall possibility for successful

employment.

PROGRAM PROGRESS

Students are expected to complete the program of training within the hours allotted by the State of Florida for completion.

The student’s rate of progress will be closely monitored by the faculty to ensure program completion in a timely manner.

Most tests, projects, and similar assignments must be completed in class under the direction of the instructor. Practice

exercises may be completed at home. Practice exercises completed at home does not count toward hours in the program.

The final course grade recorded in the Student Information System will reflect the category in which the student

was not successful. At the end of any course, students with academic, professional or skills grades below 80%

will be dismissed.

STUDENT VEHICLES

Students attending classes at the LTC Transportation Innovation Hub must observe the following rules:

● All vehicles must have a parking permit prominently displayed on the back window of a vehicle.

● Students must observe all speed limits on the campus and other posted rules. The speed limit on campus is 5

miles per hour.

● Student parking at the Transportation Innovation Hub is permitted in the main parking area in non-marked

specialty spaces (disabled, golf cart, etc.) in front of Building A, Building D, the City Utilities Building and in the

rear designated area inside the main gate.

● The gate into the property is open between 7:45 am and 8:05 am Monday through Thursday. The gate will also

be open from 12:00 pm (noon) until 12:45 pm.

● Students are not permitted to park in the marked visitors parking.

● Cars should be left with windows closed and doors locked.

● Trailers, boats, etc., may not be parked in any of the parking lots.

● For the safety of all, students are not to loiter in the parking areas during school hours or before or after school.

● Loud music/radios in vehicles on campus is prohibited.

● Parking regulations shall apply equally to bicycles, motorcycles, motor scooters and to any other type of privately

owned vehicle.

● Disabled, motorcycle, electric vehicle, and golf cart parking are designated as such and should be observed.

● Local law enforcement agencies have the authority to patrol and ticket vehicles not in compliance.

● Parking in the grass, except in the designated area in the rear of the campus and parking across the street is

prohibited.

● Overnight parking is prohibited.

STUDENT DRESS CODE FOR SAFETY

1. Pants shall be worn fastened at the waist, with a belt. Pants should be dark colored, straight legged or boot cut

(jeans are acceptable). Baggy pants are not permitted in any program area. Baggy pants are considered to be more

than one size larger than the individual’s waist. Pants can have no holes larger than the size of a Quarter.

2. Shoes must meet safety/industry standards. Open toed shoes are not permitted

3. Program logo school T-shirts MUST be worn.

4. For safety reasons, shorts, loose clothing, jewelry, and loose hair below the collar are not allowed.

Remember: students are preparing for employment in positions where public relations are often a major factor. Individual

desires may not always take precedence.

JOB DESCRIPTION

An automotive service technician is required to diagnose problems and take correct steps to correct these problems.

Technicians need to fill out work orders, talk to customers, order parts, and use test equipment.

PROGRAM OBJECTIVES

See the attached Florida State Department of Education Curriculum Framework for program objectives and desired

competencies.

Master Automotive Service Technology 1 & 2

Page 11 of 20

Master Plan of Instruction 07/22/26

2026 – 2027

Florida Department of Education

Curriculum Framework

Program Title: Master Automotive Service Technology 1

Program Type: Career Preparatory

Career Cluster: Transportation, Distribution and Logistics

Career Certificate Program

Program Number

T400700

CIP Number

0647060411

Grade Level

30, 31

Program Length

1050 hours

Teacher Certification

Refer to the Program Structure section

CTSO

SkillsUSA

SOC Codes (all

applicable)

For program SOC codes, please see the Program and Course Tables section of the CTE

Program Resources page linked below.

CTE Program

Resources

http://www.fldoe.org/academics/career-adult-edu/career-tech-edu/program-resources.stml

Basic Skills Level

Computation (Mathematics): 10

Communications (Reading and Language Arts): 9

Purpose

This program offers a sequence of courses that provides coherent and rigorous content aligned with challenging

academic standards and relevant technical knowledge and skills needed to prepare for further education and careers in

the Transportation, Distribution and Logistics career cluster; provides technical skill proficiency, and includes competency-

based applied learning that contributes to the academic knowledge, higher-order reasoning and problem-solving skills,

work attitudes, general employability skills, technical skills, and occupation-specific skills, and knowledge of all aspects of

the Transportation, Distribution and Logistics career cluster.

The content includes but is not limited to broad, transferable skills and stresses understanding and demonstration of the

following elements of the Automotive industry, planning, management, finance, technical and product skills, underlying

principles of technology, labor issues, community issues and health, safety, and environmental issues.

Additional Information relevant to this Career and Technical Education (CTE) program is provided at the end of this

document.

Program Structure

This program is a planned sequence of instruction consisting of five occupational completion points.

NOTE: It is recommended that students complete OCP-A (Automobile Services Assistor) and/or demonstrate mastery

of the outcomes in OCP-A (Automobile Services Assistor) prior to enrolling in additional Automotive Service

Technology courses. The sequence of OCP’s, after completing and/or demonstrating mastery of OCP-A

(Automobile Services Assistor), is at the discretion of the instructor.

Benchmarks identified with a designation of P-1, P-2, or P-3 are ASE tasks.

When offered at the postsecondary level, this program is comprised of courses which have been assigned course

numbers in the SCNS (Statewide Course Numbering System) in accordance with Section 1007.24 (1), F.S. Career and

Technical credit shall be awarded to the student on a transcript in accordance with Section 1001.44 (3) (b), F.S.

To teach the course(s) listed below, instructors must hold at least one of the teacher certifications indicated for that

course.

The following table illustrates the postsecondary program structure:

Master Automotive Service Technology 1 & 2

Page 12 of 20

Master Plan of Instruction 07/22/26

OCP

Course

Number

Course Title Teacher Certification Length

A AER0014 Automobile Services Assistor

AUTO IND @7 %7 %G

AUTO MECH @7 7G

300 hours

B AER0418 Automotive Brake System Technician 150 hours

C AER0453 Automobile Suspension and Steering Technician 150 hours

D AER0360 Automotive Electrical/Electronic System Technician 300 hours

E AER0110 Engine Repair Technician 150 hours

National Standards

Programs identified as having Industry or National Standards have been crosswalked with the corresponding standards

and/or benchmarks. Industry or National Standards for the Master Automotive Service Technology 1 program can be

found using the following link: https://www.aseeducationfoundation.org/program-accreditation

Florida’s Career Readiness Skills for CTE Programs

Employability Skills

01.0 Apply academic skills to workplace scenarios.

01.01 Use reading skills.

01.02 Use writing skills.

01.03 Use mathematical strategies and procedures.

01.04 Use scientific principles and procedures.

02.0 Design a solution to an industry problem.

02.01 Use critical thinking.

02.02 Use creativity.

02.03 Make sound decisions.

02.04 Solve problems.

02.05 Reason.

02.06 Plan and organize.

03.0 Manage resources within an industry project

03.01 Manage time.

03.02 Manage money or resources.

03.03 Manage materials.

03.04 Manage personnel.

04.0 Oversee the subcomponents, operations and output of a technical or organizational system.

04.01 Manage systems.

04.02 Monitor systems.

04.03 Improve systems.

05.0 Use information for decision making.

Master Automotive Service Technology 1 & 2

Page 13 of 20

Master Plan of Instruction 07/22/26

05.01

Locate information.

05.02 Organize information.

05.03 Use information.

05.04 Analyze information.

05.05 Communicate information.

06.0 Apply relevant technology to workplace scenarios to aid productivity.

06.01 Use technology.

07.0 Interpret and express interpersonal communication.

07.01 Communicate verbally.

07.02 Listen actively.

07.03 Comprehend written material.

07.04 Convey information in writing.

07.05 Communicate nonverbally.

07.06 Interpret nonverbal communication.

08.0 Interact with others to accomplish workplace goals.

08.01 Collaborate with others in a team.

08.02 Respond to customer needs.

08.03 Exercise leadership.

08.04 Negotiate to resolve conflict.

08.05 Respect others.

09.0 Manage personal behavior to maximize productivity and professional growth.

09.01 Demonstrate responsibility and self-discipline.

09.02 Adapt and show flexibility.

09.03 Work independently.

09.04 Demonstrate a willingness to learn.

09.05 Demonstrate integrity.

09.06 Demonstrate professionalism.

09.07 Take initiative.

09.08 Display positive attitude.

09.09 Take responsibility for professional growth.

Job Attainment

10.0 Find, assess and apply to job opportunities.

10.01 Identify online job posts relevant to his or her career aspirations.

10.02 Compare and contrast the job posts’ required qualifications, job duties, compensation, benefits and

employers.

10.03 Define what information, documentation and writing prompts are required for the positions.

11.0 Communicate personal competence, character and fit for a job opportunity.

11.01 Develop a resume.

Master Automotive Service Technology 1 & 2

Page 14 of 20

Master Plan of Instruction 07/22/26

11.02

Write a cover letter.

11.03 Curate a professional portfolio that includes work products.

11.04 Prepare for and experience a mock job interview.

12.0 Cultivate and leverage relationships to professionally advance.

12.01 Request a signed reference letter, letter of recommendation and/or an online skill/professionalism

endorsement.

12.02 Develop a plan to cultivate a professional digital footprint.

12.03 Develop a networking plan for a specific industry of interest.

Standards

After successfully completing this program, the student will be able to perform the following:

01.0 Proficiently explain and apply required shop and personal safety tasks relating to the automotive industry.

02.0 Explain and apply required tasks associated with the proper use and handling of tools and equipment relating to

the automotive industry.

03.0 Demonstrate proficiency in preparing vehicle for routine pre/post maintenance and customer services.

04.0 Explain and apply proficiently the diagnosis, service and repair of drum\disc brake, hydraulics, power assist units,

electronic brakes, traction control, stability control systems and miscellaneous (wheel bearings, parking brake,

electrical, etc.) systems.

05.0 Explain and apply proficiently the diagnosis, service and repair of front and rear suspensions systems, wheel

alignment, and wheels and tires.

06.0 Explain and apply proficiently the diagnosis, service and repair of electrical/electronic system components,

battery, starting, charging, lighting, gauges, warning devices, driver information, horn, wiper/washer and

accessory systems.

07.0 Explain and apply proficiently the diagnosis, service and repair of engines, cylinder heads, valve train,

engine block, lubrication and cooling systems.

Master Automotive Service Technology 1 & 2

Page 15 of 20

Master Plan of Instruction 07/22/26

2026 – 2027

Florida Department of Education

Curriculum Framework

Program Title: Master Automotive Service Technology 2

Program Type: Career Preparatory

Career Cluster: Transportation, Distribution and Logistics

Career Certificate Program

Program Number

T400800

CIP Number

0647060412

Grade Level

30, 31

Program Length

750 hours

Teacher Certification

Refer to the Program Structure section

CTSO

SkillsUSA

SOC Codes (all

applicable)

For program SOC codes, please see the Program and Course Tables section of the CTE

Program Resources page linked below.

CTE Program

Resources

http://www.fldoe.org/academics/career-adult-edu/career-tech-edu/program-resources.stml

Basic Skills Level

Computation (Mathematics): 10

Communications (Reading Language Arts): 9